Introduction

Nelson Bubble Lamps have been a popular lighting fixture for over six decades. Designed by George Nelson in 1947, these lamps are known for their unique shape that resembles a bubble. However, like any other home decor item, Nelson Bubble Lamps may require repairs from time to time. In this article, we will guide you through the steps to repair your Nelson Bubble Lamp.

Materials Required

Before you begin repairing your Nelson Bubble Lamp, ensure that you have the following materials:

• Replacement bulb
• Screwdriver
• Wire strippers
• Electrical tape

Step-by-Step Guide to Repair Your Nelson Bubble Lamp

Step 1: Cut the Power Supply

Before you start repairing your Nelson Bubble Lamp, ensure that you turn off the power supply to the lamp. This can be done by unplugging the lamp from the socket.

Step 2: Remove the Lamp Shade

The next step is to remove the lampshade from the lamp. To do this, use a screwdriver to unscrew the screws located at the top and bottom of the lamp base. Once the screws are removed, gently pull the shade away from the base.

Step 3: Access the Bulb

With the lampshade removed, you can now access the bulb. Carefully remove the old bulb and inspect it for any damages. If the bulb is damaged, it is recommended that you replace it with a new one.

Step 4: Install the New Bulb

To install the new bulb, follow these steps:

1. Use wire strippers to strip half an inch of insulation from the end of the electrical wire.
2. Insert the exposed wire into the base of the new bulb.
3. Firmly push the bulb into the socket until it clicks into place.

Step 5: Reattach the Lampshade

To reattach the lampshade, follow these steps:

1. Line up the notches on the lampshade with the grooves on the base of the lamp.
2. Gently push the shade onto the base until you hear a click.
3. Use the screws to attach the shade to the base.